3 BBL Stout Hard Piped Electric Insulated Brewhouse “LIKE NEW”

(NEW: 53,000$USD; Installed June 2023; Used 12 times)

• 3 bbl (145 gal) insulated brew kettle
• 3 bbl insulated open top mash tun (120 gal)
• Wort grant
• Brewers platform
• Brew house hard piping
• Two pump mounts for use with mash tun
• Mash tun wort pump (Brewmation controls)
• 3/4 hp mobile whirlpool/knockout pump (Brewmation
• controls)
• Heat exchanger (Thermaline)
• Controls and Heating Elements (Brewmation)
• Hoses to/from heat exchanger
• Condensate Stack for 2 to 4 bbl Brew Kettles. Adds 18-in. to kettle height. Extends 32-in. (end to end). Connect your 6-in. steam vent to the top of the tee on this condensate stack. Outside diameter of kettle TC flange is 6-9/16“
• 18-in. Sparge Arm with 2 clamps, 2 gaskets, and 1 end cap
• Vorlauf pipe for mash tuns. Length is adjustable from ~11“ to ~18”
• Brew house Control Panel Dimensions : 30”x30“x10” LED Lamps BK & MT both have LED lights
• 24 KW Basic Electric Hard Piped Controls Turnkey Package with Elements, 2 VSD wort Pumps
• GFCI protection is provided for all of the connected devices. Pumps, and heating elements are controlled via the panel

Control Panel:

• 208V-240V Single or three phase
• Internal GFCI protected breakers for heating elements & pumps.
• 1ea. LOVE controller (for displaying Mash temp)
• 1ea. LOVE controller (for displaying & controlling Kettle temperatures)
• Heat on/off switches for the Kettle.
• 2ea. Pump on/off switches (to control flange mounted outlets).
• VSD controls for pumps

POWER REQUIREMENTS: The above brewery can be powered by a single phase 240V circuit or a three-phase 240 or 208V circuit. The unit provides complete GFCI protection. The wires are terminated to an interior distribution panel. A separate ground and neutral is required. The system can be set up to accept the following circuit sizes. 150 amps single phase or 125 amps three phase

Heaters & Components Kettle:

• 4 ea. 6000 Watt heating elements (total wattage 24,000 watts).
• 1.5” Tri-clamp base.
• 1 ea. Temperature probe
• 1 ea. Stainless safety float switch
• All elements are individually GFCI protected

Mash Tun:

• 1 ea. Temperature probe and panel wiring

Heating System: The heating system for the Kettle utilizes immersion electric elements. (4) 6,000-watt elements (24,000 watts ). A stainless safety float switch in tank protects the heaters, to prevent them from running dry. The elements in the kettle have a variable power level via the potentiometer on the control panel to prevent “boil-overs” and to adjust the boil intensity Pumps – All VSD

Mash Tun – Wort Pump – Mash / Lauter / pump over / CIP 1/2 HP Ampco Pump Pump Type:Centrifugal Ampco0 Motor Type: 1/2 HP TEFC Flow Rate: 21 GPM at 17ft head (high speed) Maximum Temp: 220F Pump Head: Ampco Connections: Stainless tri-clamp

Boil Kettle – Wort Pump – Boil / Whirl / precision knockout / CIP 3/4 HP Ampco Pump Pump Type:Centrifugal Ampco Motor Type: 3/4 HP TEFC Flow Rate: 38 GPM at 40ft head (high speed) Maximum Temp: 220F Pump Head: Ampco Connections: Stainless tri-clamp Controls Turnkey Hard Pipe Package (2-4bbl)

HEX / Wort chiller: To be paired with already existing CLT HEX / Wort chiller: Cold water inlet temperature = 40 F max.; Wort output = 50 F min. Cast out 3 bbls in 45 minutes. Single Stage Thermaline Wort Chiller T4-21 with powder coated steel frame, TAB FEET and 316SS chilling plates, TC fittings.

Inline Wort Thermometer. Dial Thermometer with Tri Clamp connection, Range: 30 to 180F. Stem length = 3.25“

Inline Oxygenation Assembly. Includes Tee, Sight Glass, Custom Sintered Aeration ‘Stone’, 2 Clamps, 2 Gaskets.

TWO (2) 3 Bbl Jacketed Conical Fermenters – Shadowless Side Manway. Single-zone jacketing is in cone and on side wall. 119 gal. capacity. Includes racking arm, CIP arm and spray ball, sample valve, racking arm, 2 butterfly valves, adjustable feet. Rated to 2BAR (29 psi). Constructed of 304 stainless steel, tank material thickness is 3mm, jacket and outer shell thickness is 2mm. Cone has 60 degree interior angle. Dimensions 33.5-in. diameter x 77-in.H. 20mm OD x 4-in. Long Sintered Steel Carbonation Stone, 2 micron pore size.